Filter
Top Products
030-300411 Rev. A 82 July 2004
Westell (Models 6000, 6100, 6110)
User Guide
11.10 Turbo TCP
If you select Turbo at the Configuration menu, the following screen will be displayed. Click on the Turbo TCP
Enable box to enable Turbo.
NOTE: Turbo is a network traffic prioritization and queuing method that dramatically improves the performance of
downstream TCP/FTP/HTTP transfers under heavy upstream bandwidth utilization conditions.
Turbo TCP Enable Factory Default = Disabled
If Enabled, Turbo will assign a high priority to TCP signaling packets in the upstream
direction, then place the packet in one of several transmit queues based on this priority.