Filter
Top Products
030-300411 Rev. A 23 July 2004
Westell (Models 6000, 6100, 6110)
User Guide
4. Windows ME: When the System Settings Change screen appears, the USB drivers are installed properly. See
Figure 20. Click Yes.
Figure 20. Restart the Computer
Congratulations! You have completed the software installation for the USB drivers. After the computer has
restarted, the Modem is ready for use. You must now go to section 7.
6.4 Installing the USB Driver for Windows 2000
NOTE: The actual information displayed in the USB screens may vary according to product.
1. Windows 2000: After you have connected the Modem to your PC, the Found New Hardware window appears
(Figure 21). In a few moments, the Found New Hardware Wizard window appears (Figure 22). Click Next.
Figure 21. Found New Hardware
Figure 22. Welcome to Install Device Driver