Westell Technologies 6100 Network Router User Manual


 
030-300411 Rev. A 80 July 2004
Westell (Models 6000, 6100, 6110)
User Guide
If you want to save your new firewall settings, click on save in the screen labeled User Define Firewall Rules.
NOTE: Westell recommends that you do not change the settings in the User Defined Firewall Rules screen. If you
need to reset the Router to factory default settings, push the reset button on the rear of the Router.
If you clicked save in the User Define Firewall Rules screen, the following pop-up screen will be displayed. Click
OK when asked Do you wish to save these Rules to Flash and switch you Security Level to “User”? This will
save your new firewall settings. If you click Cancel, your new firewall settings will not be saved.