Western Telematic IPS-800-D20, IPS-800E-D20, IPS-1600-D20, IPS-1600E-D20 Switch User Manual


 
5-20
IPS-800/1600-D20 Series - User’s Guide
5.4. Save Configuration Parameters
The IPS offers two methods for saving parameters; Saving to Memory, and
Saving to an ASCII File.
Saving parameters to memory ensures that your user-defined configuration
will remain intact if power to the IPS is temporarily interrupted. After the
configuration menus have been used to change parameters, the IPS will prompt
you to save parameters before exiting from command mode. At this point, the
IPS offers the options to Save parameters, continue without saving, or revert to
the previously saved parameters.
Saving Parameters to an ASCII file allows you to create a "backup" of your
currently defined configuration. As described in Section 7, this provides quick
recovery in the event that the unit is accidentally reset to default parameters,
and also allows you to copy parameters to other IPS units when several units
need to be configured with the same parameters.
Notes:
After new Parameters have been applied, the IPS will display a
"Save" prompt. In the Web Browser Interface, this prompt appears
when you leave the configurations menus. In the Text Interface,
the "Save" prompt appears when you disconnect from the unit.
At this point, you have the option of saving new parameters to
memory, continuing without saving, or reverting to previously saved
parameters.
If parameters have not been saved, and if power to the IPS is
interrupted, newly defined parameters will be lost. When power is
restored, the unit will then be configured with the previously saved
parameters.