Filter
Top Products
4. Configure Network Port: In order to communicate with
the RPC-4840N via the Network Port, you must first
define the IP Address, Subnet Mask, and Gateway
Address. At the RPC> command prompt, type /N and
press [Enter] to display the Network Parameters menu.
a) Settings for network parameters will depend on the
configuration of your individual network. Please
contact your network administrator to determine
appropriate settings for the IP Address, Subnet Mask,
and Gateway Address.
b) To assign network parameters, key in the number for
the desired parameter, press [Enter], and then follow
the instructions in the resulting submenu. For
example, to define the IP Address, type 1 and
press [Enter].