Filter
Top Products
106 Operating Manual for Multichannel Functionality (GPIB-M)
SCPI Command Reference
SCPI Command Summary
Table B.3Commands for Output Control
Function
SCPI Command
Description Query
Set (Immediate) Current
Setpoint
[[:]SOURce][<channel>]:CURRent[:LEVel][:IMMediate][:A
MPLitude] {<current>|MAXimum|MINimum}
Change current setpoint Yes
Set Triggered Current
Setpoint
[[:]SOURce][<channel>]:CURRent[:LEVel]:TRIGgered[:AMP
Litude] {<current>|MAXimum|MINimum|DEFault}
Change triggered current setpoint Yes
Set (Immediate) Voltage
Setpoint
[[:]SOURce][<channel>]:VOLTage[:LEVel][:IMMediate][:A
MPLitude] {<voltage>|MAXimum|MINimum}
Change voltage setpoint Yes
Set Triggered Voltage
Setpoint
[[:]SOURce][<channel>]:VOLTage[:LEVel]:TRIGgered[:AMP
Litude] {<voltage>|MAXimum|MINimum|DEFault}
Change triggered votlage setpoint Yes
Set Voltage Slew Rate
Voltage
[[:]SOURce][<channel>]:VOLTage:SLEW:STEP{<slewrate-vo
ltage>|MAXimum|MINimum|DEFault}
Sets the voltage slew rate voltage change
for the programmed time interval
Yes
Set Voltage Slew Rate
Interval
[[:]SOURce][<channel>]:VOLTage:SLEW:INTerval{<slewrat
e-interval>|MAXimum|MINimum|DEFault}
Sets the voltage slew rate time interval for
the programmed voltage change
Yes
Set Over Current
Protection Level
[[:]SOURce][<channel>]:CURRent:PROTection[:OVER][:LEV
el] {<current>|MAXimum|MINimum}
Set the over current protection level Yes
Set Over Current
Protection
Shutdown State
[[:]SOURce][<channel>]:CURRent:PROTection[:OVER]:STAT
e <on-off-state>
Select over current protection to
shutdown(ON) or set alarm (OFF)
Yes
Query Over Current
Protection Tripped
[[:]SOURce][<channel>]:CURRent:PROTection[:OVER]:TRIP
ped?
Query if over current protection mechanism
has tripped
N/A
Set Under Current
Protection Level
[[:]SOURce][<channel>]:CURRent:PROTection:UNDer[:LEVe
l] {<current>|MAXimum|MINimum}
Set under current protection level Yes
Set Under Current
Protection
Shutdown State
[[:]SOURce][<channel>]:CURRent:PROTection:UNDer:STATe
<on-off-state>
Select under current protection to shutdown
(ON) or set alarm (OFF)
Yes
Query Under Current
Protection Tripped
[[:]SOURce][<channel>]:CURRent:PROTection:UNDer:TRIPp
ed?
Query if under current protection
mechanism has tripped
N/A
Set Over Voltage
Protection Level
[[:]SOURce][<channel>]:VOLTage:PROTection[:OVER][:LEV
el] {<voltage>|MAXimum|MINimum}
Set the over voltage protection level Yes
Query Over Voltage
Protection Tripped
[SOURce][<channel>]:VOLTage:PROTection[:OVER]:TRIPped
?
Query if over voltage protection mechanism
has tripped
N/A
Set Under Voltage
Protection Level
[[:]SOURce][<channel>]:VOLTage:PROTection:UNDer[:LEVe
l] {<voltage>|MAXimum|MINimum}
Set under voltage protection level N/A
Set Under Voltage
Protection
Shutdown State
[[:]SOURce][<channel>]:VOLTage:PROTection:UNDer:STATe
<on-off-state>
Select under voltage protection to shutdown
(ON) or set alarm (OFF)
Yes
Query Under Voltage
Protection Tripped
[[:]SOURce][<channel>]:VOLTage:PROTection:UNDer:TRIPp
ed?
Query if under voltage protection
mechanism has tripped
N/A
Set High Current Limit
[[:]SOURce][<channel>]:CURRent:LIMit:HIGH
{<current>|MAXimum|MINimum}
Set upper limit of current setpoint range (soft
limits)
Yes
Set Low Current Limit
[[:]SOURce][<channel>]:CURRent:LIMit:LOW
{<current>|MAXimum|MINimum}
Set lower limit of current setpoint range (soft
limits)
Yes