Xantrex Technology GPIB-M-XT Power Supply User Manual


  Open as PDF
of 134
 
SCPI Command Reference
SCPI Command Summary
Release 2.1 109
Table B.10Status Commands
Function
SCPI Command
Description Query
Query Operation Status
Condition Register
[:]STATus[<channel>]:OPERation:CONDition?
See Section 4, “Status Registers” N/A
Set Operation Status
Enable Register
[:]STATus[<channel>]:OPERation:ENABle <status-enable>
See Table 4.1, on page 72.Yes
Query Operation Status
Event Register
[:]STATus[<channel>]:OPERation[:EVENt]?
See Table 4.1, on page 72.N/A
Set Operation Status
Negative Transition
Register
[:]STATus[<channel>]:OPERation:NTRansition
<status-enable>
See Table 4.1, on page 72.Yes
Set Operation Status
Positive Transition
Register
[:]STATus[<channel>]:OPERation:PTRansition
<status-enable>
See Table 4.1, on page 72.Yes
Query Operation Status
Current Sharing Condition
Register
[:]STATus[<channel>]:OPERation:CSHare:CONDition?
See Table 4.6, on page 74.N/A
Set Operation Status
Current Sharing Enable
Register
[:]STATus[<channel>]:OPERation:CSHare:ENABle
<status-enable>
See Table 4.6, on page 74.Yes
Query Operation Status
Current Sharing Event
Register
[:]STATus[<channel>]:OPERation:CSHare[:EVENt]?
See Table 4.6, on page 74.N/A
Set Operation Status
Current Sharing Negative
Transition Register
[:]STATus[<channel>]:OPERation:CSHare:NTRansition
<status-enable>
See Table 4.6, on page 74.Yes
Set Operation Status
Current Sharing Positive
Transition Register
[:]STATus[<channel>]:OPERation:CSHare:PTRansition
<status-enable>
See Table 4.6, on page 74.Yes
Query Operation Status
Remote Control Condition
Register
[:]STATus[<channel>]:OPERation:RCONtrol:CONDition?
See Table 4.5, on page 74.N/A
Set Operation Status
Remote Control Enable
Register
[:]STATus[<channel>]:OPERation:RCONtrol:ENABle
<status-enable>
See Table 4.5, on page 74.Yes
Query Operation Status
Remote Control Event
Register
[:]STATus[<channel>]:OPERation:RCONtrol[:EVENt]?
See Table 4.5, on page 74.N/A
Set Operation Status
Remote Control Negative
Transition Register
[:]STATus[<channel>]:OPERation:RCONtrol:NTRansition
<status-enable>
See Table 4.5, on page 74.Yes
Set Operation Status
Remote Control Positive
Transition Register
[:]STATus[<channel>]:OPERation:RCONtrol:PTRansition
<status-enable>
See Table 4.5, on page 74.Yes
 previous next