Xantrex Technology 400 Plus, 400 R Power Supply User Manual


 
Introduction
1-2 975-0162-01-01
Overheating
The XPower Powerpack is protected from overheating. If the
inverter exceeds a safe temperature, power to the AC Outlet
and DC Socket automatically shuts off. It will reset
automatically after the unit cools down.
Low Battery Protection
Low battery protection protects the internal battery from
excessive discharge and possible damage. When the AC
Outlet
ON/OFF switch is turned on, an audible alarm alerts you
when the internal battery is nearly discharged (11.0Vdc) and
the unit turns off at 10.5 Vdc.
Jump-Start Cables Safety Fuse
The XPower Powerpack comes with a user-replaceable
250 A fuse to protect the unit and vehicle battery from
damage through reverse polarity and short-circuit conditions.
CAUTION
When using only the DC Socket to power your loads, be sure to
turn the AC Outlet O
N/OFF switch to ON. This ensures that the
Low Battery Alarm will sound and will alert you to a low battery
condition. Failure to turn the AC Outlet O
N/OFF Switch to ON
when using the DC Socket can allow the unit to be over-discharged
which can destroy the battery. Over-discharging the battery in this
manner will void the unit’s warranty.
975-0162-01-01_Rev-C.book Page 2 Friday, October 20, 2006 10:40 AM