Filter
Top Products
XPower Powerpack Features
975-0162-01-01 2-3
See “Control Panel Operation” on page 3–16 for detailed
instructions on using the Control Panel.
Feature Description
DC Power Socket can:
• Power 12 volt DC auto, RV, or marine appliances.
• Recharge
XPower Powerpack from a 12 V outlet in a vehicle
using the DC Charging Cable.
Two AC Outlets are standard 3-prong outlets supplying 120 Vac
power for running AC appliances.
AC Outlet
ON/OFF switch turns power on and off to the AC
Outlets. The switch illuminates when the switch is turned on and
power becomes available at the AC outlets.
Digital Display displays the inverter’s Output Power in W or
Battery Charge status in %FULL.
The Charging Status light illuminates and blinks when the XPower
Powerpack starts charging using the AC Charger. The light will
illuminate solid when the battery has reached it’s full charge.
This light only works when the unit is being charged using the
3.5mm Charger Input Socket in the storage compartment of the
unit. This light does not illuminate when charging through the DC
Socket.
Battery Charge % light illuminates (green) when Battery Charge
information is displayed on the Digital Display.
Output Power (W) light illuminates (green) when Output Power
information is displayed on the Digital Display.
Display Function button provides the means for alternating
between showing the Output Power or the Battery Charge on the
Digital Display. This button also turns the power to the display ON
or OFF to conserve power.
Not
shown
Audible Alarm (inside the unit) sounds in the event of an over-
temperature condition or a low battery condition. This feature only
works when the AC Outlet On/Off Switch is in the ON position.
1
2
3
4
5
6
7
8
975-0162-01-01_Rev-C.book Page 3 Friday, October 20, 2006 10:40 AM