Filter
Top Products
Operation
3-32 975-0162-01-01
To connect the XPower Powerpack to an external battery using the
jump-start cables:
Figure 3-19
Connecting the XPower Powerpack to an External Battery
To connect the XPower
Powerpack to an external
battery using the jump-start
cables:
1. Connect the cables to the
Jump-Start Cable Port on the
left side of the XPower
Powerpack.
2. Connect the black negative (–)
clamp of the cables to the black
negative (–) terminal of the
external battery.
3. Connect the red positive (+)
clamp of the cables to the red
positive (+) terminal of the
external battery.
To disconnect the cables from
an external battery and from the
XPower Powerpack:
1. Remove the red positive (+)
clamp second.
2. Remove the black
negative (–) clamp first.
3. Remove the cables from the
Jump-Start Cable Port last.
4. Replace the plastic port cover
over the Jump-start cable port.
975-0162-01-01_Rev-C.book Page 32 Friday, October 20, 2006 10:40 AM