Filter
Top Products
Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document
- 29 -
Multifunction Finisher: Standard & Professional
Two accessories are available. One is required for machine operation.
Standard Finisher
Top Tray / Offset Stacker / Stapler
• Envelopes and Statement size paper (5.5” x 8.5”) will be delivered only to the top tray.
• Staple locations for non-standard size papers (e.g., standard sizes are A4, Letter size, etc.) will be
slightly asymmetrical. The staple will be located in the position appropriate for the next nearest
paper standard paper size.
• Certain stocks (stocks with high clay content and / or composed of other high density materials)
may reduce the number of sheets that can be stapled and / or result in miss-staples.
Sub-system Feature Comments
Top Tray 250 sheet capacity (20 lb. bond)
5.5” x 8.5” to 12.6” x 18.5”
Main Stacker 2000 sheet capacity
5.83” x 8.0” to 12.6” x 18.5”
• Output is normally delivered 1-n, face
down to the main tray; jobs can be
programmed for face up delivery if
desired but stapling position &
orientation will not be optimal
• The system will cycle down when the
stacker is full; overflow will not go to the
top tray
• Sizes can be mixed in the stacker,
however mixed size stacks should be
closely monitored to ensure stack
stability
• The maximum stack size capability is
degraded for thin stapled sets.
Stapler
• Staples up to 100 sheets 20 lb. bond of paper
sized 8.5” x 14” or less with 100 sheet staple
cartridge loaded
• Staples up to 50 sheets 20 lb. bond paper sized
8.5” x 14” or less with 50 sheet staple cartridge
loaded
• One or Two Staples
• The number of sheets that can be stapled
will decrease in relationship to the weight of
the paper.
• Does not staple tabs or transparencies
• The staple placement on the page is shown
on the controller
Other 100-sheet stapler cartridge typical minimum capabilities:
- 70 sheets for 28lb (105 gsm) of paper sized 8.5" x 14 or less
- 30 sheets for 80lb cover (216gsm), all paper sizes
- 20 sheets for 28lb (105gsm) Color Expressions and equivalent papers, all paper sizes
Other 50-sheet stapler cartridge typical minimum capabilities:
- 35 sheets for 28lb (105 gsm), all paper sizes (including CX and equivalent papers)
- 15 sheets for 80lb cover (216gsm), all paper sizes
- 20 sheets for 28lb (105gsm) Color Expressions and equivalent papers
Staple Cartridge Limitation
: The machine software does not distinguish between the 50 sheet staple cartridge
and the 100 sheet staple cartridge. This means that if the 50 sheet staple cartridge is loaded in the machine,
and a job with more than 50 sheets is sent to be stapled, a mis-staple or stapler jam will probably occur. If the
50 sheet staple cartridge is used, it is the responsibility of the operator to ensure that jobs exceeding 50 sheets
are not submitted for stapling.