Filter
Top Products
Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document
- 30 -
Professional Finisher
Includes capabilities above plus a booklet maker, and
Z-fold / C-fold
• Top Tray / Offset Stacker / stapler: Same capabilities &
limitations as above
This product is not DFA compatible.
Item Xerox Nuvera™ 100/120 Digital
Copier/Printer w/ Professional Finisher
Comments
Top Tray
• Same as Standard Finisher
Main Stacker
• Same as Standard Finisher
Stapler
• Same as Standard Finisher
Booklet maker
• C – fold
1 sheet Letter and A4 sizes
• Z – fold
1 sheet Letter and A4 sizes
• Bi – fold
5 sheet capacity (20 lb. stock), Letter (8.5” x
11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x
14”), Ledger (11” x 17”) and A3 sizes.
• Booklets – Dual Staple
15 sheet capacity (20 lb. stock), Letter (8.5” x
11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x
14”), Ledger (11” x 17”) and A3 sizes.
• C - fold and Z- fold weight range is 16 to
32 lb. (60 to 120 gsm)
• Bi-fold & Booklet sheet capability is
reduced with heavier stocks
• No face trim
• No Engineering folder
• No hole punch
Note: When using the booklet maker, some pre-printed cover sheets may exhibit tear-off from the stapled
booklet, depending on the pre-printed ink area coverage and ink type. It is advisable to verify your application
prior to production.
Stack Quality
The maximum stack scatter is 25.0 mm or less for:
- Unstapled sets
- Stapled sets greater than 20 sheets
The maximum stack scatter is 60.0 mm or less for:
- Stapled sets less than or equal to 20 sheets
- Stack size maybe limited for stapled sets less than or equal to 20 sheets
Within Set Registration
See Tables 1 & 2 for specification, below. Figure 1 details the correct measurement technique