Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Example @Y94, 01, 1B28733354@ selects the Courier typeface.
Remember You do not actually need FSL Y92 through Y94 in order to
support FSL Y91—GFID/Font Select Setup since the PCL strings
for point size, attribute, symbol set, and typeface are generated
by algorithm.
Y96—GFID Select
@Y96, <GFID>@
Allows you to change fonts in application software without a font
change facility. Thus you access all fonts available in the attached
printer.
The host system processes the data as normal printable
characters, whereas the command string is interpreted by the
printer as a font change request.
<GFID> Global Font Identifier expressed in decimal in the
range of 1 to 65535.
This function cannot be saved in nonvolatile memory.
Refer to the “Configuration and Resource Utility” and “Font
support and selection” chapters for more information on fonts.
Example @Y96, 255@ selects a 17-pitch Letter Gothic font.
Y98—Enable Automatic Page Orientation (APO) Support
@Y98, n1, [n2]@
activates or deactivates the automatic page orientation function
for the trays. This function allows you to choose between tray
orientations based upon the commands received from the host
or based upon the orientation set by the default tray orientation.
The factory default is disabled.
There are two parameters in this function.
3-62 XEROX MRP FAMILY COAX COMMAND REFERENCE