Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
n1 Valid values are:
0* Enable APO
1 Disable APO.
For all n1 values > 0, disable is selected. The
default for coax interface is n1 = 1.
n2 Valid values are:
1 Ignored
2 Tray 1
3 Tray 3
4 Manual feed
5 Tray 2
6 Tray 4
7-255 Reserved (optional feeder).
Factory default for n2 is all trays selected except
n2 = 5 is for tray 2.
Example @Y98, 0, 2@ enables Automatic Page Orientation for tray 1.
Y100—Printer Share String and Timer
@Y100, n1 {, n2}@
Selects timeout for the actual input, and defines the user string
to be sent to the printer before data transmission.
n1
timeout
This is the timeout with numeric value between 0
and 255. Increments are, approximately, in steps
of 1 second duration.
Your Xerox MRP Family printer has a default of 20
(approximately 20 seconds). The n1 = 0 enables
i/f to always send the share string when entering
Centronics mode.
n2
string
If this optional parameter is defined, the string is
sent to the printer before data transmission,
when selected by the share unit.
Factory default is no string (optional).
This function has immediate effect. It is saved using function
X1—Store Settings in Permanent Storage.
XEROX MRP FAMILY COAX COMMAND REFERENCE 3-63