Filter
Top Products
CONFIGURATION AND RESOURCE UTILITY (MVS)
name. Enter a name for this list followed by the enter key. This
will put you into a standard TSO edit session.
The following list would load two fonts and a configuration
description:
FONT=0204
FONT=0206
CFGD=YOURCFGD
Press the PF3 key to save and exit. You may now perform the
functions on the list that are described on the following page.
Loading lists of resources
This program downloads lists of resources. You can use this
program rather than the XLSTLST program to download a list of
resources if you already know the name of the list and do not
need to modify the list. The list to be downloaded MUST be in
the XMRP.V1R2M1.LSTLIB library. To execute, enter the
following on the primary command line:
==> TSO EXEC ’XMRP.V1R2M1.CLIST(LDXRXLST)’ ’<
list name
> <
printer
destination
>’
Accessing the List Manager screen
To access the List Manager screen, enter the following on the
selection line or command line and press <Enter>:
==> TSO EXEC ’XMRP.V1R2M1.CLIST(LDXRXLST)’ ’<list name> <printer
destination>’
The List Manager screen is displayed and shows the following
options:
Option B Browse list data.
Option C Copy list data. Observe TSO naming conventions as follows:
• alpha or @, $, #only for first character
• alpha or numeric @,# $ for remaining characters
• 8 character limit.
Option D Delete a list from the library.
Option M Modify a list.
Option L Download to a printer the resources contained in the list.
Downloading ASCII files
LDXRXASC This command works like Font Download CLIST (LDXRXFNT) and
is used to Double Byte (Hex Transparency Mode) an application
or user-created ASCII PostScript or PCL5 file. For example, there
are PostScript ASCII files on your host system, such as the one
used for jam recovery on the desktop. You can modify the CLIST
to point to the data set and download your ASCII PostScript file
via LDXRXASC:
7-10 XEROX MRP FAMILY COAX COMMAND REFERENCE