Filter
Top Products
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Y46—Set IRQ Timer
@Y46, n1 [, n2] [, n3]@
Sets Intervention Required (IRQ) time, Hold Time Out, and Busy
Time Out. This function takes effect as soon as the command is
received.
n1 Values for n1 are:
000 Never send IRQ
001 to 255 Send IRQ after n1 x 5 seconds if
printer error
12* Send IRQ after 1 minute
n2 Values for n2 are:
000 Never send Hold Time Out
001 to 255 Send Hold Time Out after n2 x 5
seconds if printer is in Stop
mode.
120* Send hold time out after 10
minutes.
n3 Values for n3 are:
000 Never send Busy Time Out
001 to 255 Send Busy Time Out after n3 x 5
seconds if printer is busy.
120* Default, send busy time out
after 20 minutes.
This function allows you to define the period of time between an
event that has occurred requiring operator intervention and the
sending of an IRQ timeout response to the host. The factory
default is 12, which is one minute.
If the printer is put into a not ready state for more than 10
minutes, an IRQ occurs independent of this setting except when
‘no IRQ’ is selected.
The IRQ timeout is rounded up to the nearest minute.
Example @Y46, 036@ sets IRQ time for printer errors to 3 minutes.
3-38 XEROX MRP FAMILY COAX COMMAND REFERENCE