Scanning
62 DocuMate 510 Scanner User’s Guide
Configuring Before Scanning
Choosing Configure Before Scan simply opens a scanning
interface when you click a button. You can then use the interface to
change the Resolution, Scan Mode, and other settings. When you
scan, the scanned image will still be sent as the file type and to the
same Destination Application already selected in the One Touch
Properties window for that button.
To configure before scanning:
1. Open the One Touch Properties window.
2. Select the scan configuration Configure Before Scan.
3. Right-click on Configure Before Scan and choose an interface
to use for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes
prior to scanning. See “Scanning with the TWAIN Interface
from PaperPort” on page 81.
WIA—The Windows Image Acquisition Interface (WIA) opens
for you to make changes prior to scanning (available on
Windows XP or Windows Vista only). See “Scanning with the
WIA Interface” on page 106.
4. Click OK or Apply on the One Touch Properties window.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and
choose the
interface to use
for scanning.
Click the arrows to
select the button.