Filter
Top Products
DocuMate 510 Scanner User’s Guide 63
Scanning
To Scan Using Configure Before Scan
1. Put the documents in the scanner’s ADF tray or on the flatbed
glass.
2. Click on the button you set to use the Configure Before Scan
option.
In the example shown on the previous page, the scanning
option 9 has been set to use Configure Before Scan.
3. The Basic TWAIN interface will open.
4. Choose the Scan Type in the upper-left corner of the screen.
Auto Document Feeder—choose this option to scan a stack
of pages in the ADF.
Scan Reflective Using—choose this option to scan a single
page on the flatbed.
5. Choose the Picture Type of Black & White, Grayscale or Color.
6. Click on the Scan button in the TWAIN interface.
7. Your documents will be scanned and sent to the Destination
Application specified in the One Touch 4.0 Properties.
In the example shown on the previous page, the Destination
Application is Microsoft Paint.
Please see “Scanning with the TWAIN Interface from PaperPort”
on page 81 for instructions on using the scanning features found in
the Basic TWAIN and Advanced TWAIN interfaces.