Filter
Top Products
Xerox 4110/4590 Getting Started
4-6
4. Loading Paper
Loading paper in Tray 8 (Interposer)
If you have an optional Interposer (Tray 8), use the following
procedure for loading paper into it.
KEY POINT: The Interposer (Tray 8) is used when your desired
output includes separators, or covers; therefore, it cannot have an
image copied on to it. Your separator or cover paper may be blank
or with an image already copied onto it.
1. Hold the center of the paper guides and slide to the desired
paper size.
2. Load the separator or cover paper into the tray; ensure that is
aligned to the front of the tray.