Xerox 6030 Copier User Manual


 
XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM 25
Power Switch for the Scan System
When the Scan System is switched on, the fluorescent lamp inside the
Scan System illuminates immediately. If the lamp does not illuminate,
refer to the "Problem solving" section of this guide.
Certain Controllers receive their power from the Printer. They do not
have a separate power switch.
NOTE: Ensure that the Scan System is switched on first and the “P” is
displayed in the Status Indicator window.
To power on these Controllers and the Printer, do the following:
1. Switch the Printer Power Switch to the Off position.
2. Switch the Circuit Breaker Switch to the On position.
3. Switch the Printer Power Switch to the On position.
Switching on the
Controller and the Printer
(XEROX WIDE FORMAT
COPY SYSTEM
8825/8830/8850)
SCAN SYSTEM
Power Switch