Xerox 6030 Copier User Manual


 
XEROX WIDE FORMAT COPY SYSTEM Safety Notes ix
WARNING – Electrical Safety
Information
Use only the power cord supplied with this equipment.
Plug the power cord directly into a grounded electrical outlet. Do not
use an extension cord. If you do not know if an outlet is grounded,
consult a qualified electrician.
If this machine needs to be moved to a different location, contact a Xerox
service representative or your authorized local representative or service
support organization.
Improper connection of the equipment-grounding conductor can
result in electrical shock.
Do not place this equipment where people might step or trip on the
power cord.
Do not place objects on the power cord.
Do not override or disable electrical or mechanical interlocks.
Do not obstruct the ventilation openings.
Never push objects of any kind into slots or openings on this
equipment.
If any of the following conditions occur, switch off the power to the
machine immediately and disconnect the power cord from the
electrical outlet. Call an authorized local service representative to
correct the problem.
- The equipment emits an unusual noise or odor.
- The power cord is damaged or frayed.
- A wall panel circuit breaker, fuse, or other safety device has
been tripped.
- Liquid is spilled into the copier/printer.
- The equipment is exposed to water.
- Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is
attached to the back of the machine as a plug-in device. To remove all
electrical power from the equipment, disconnect the power cable from
the electrical outlet.