Xerox 6204 Copier User Manual


 
XEROX WIDE FORMAT COPY SYSTEM Main Menu 101
CUSTOM R/E PRESETS
100.0% 100.0%
100.0% 100.0%
100.0% 100.0%
Custom R/E Presets Screen
7. Press the
Previous or Next key to highlight the value that you
wish to change.
8. Use the numeric keypad to enter the desired value. The valid
value range is from 25% to 400%.
NOTE: Duplicate values are not displayed in the Preset
Reduction/Enlargement list. You can remove a preset value from the list
by setting the value to 100.0%.
9. Press the Enter key to confirm the value.
10. Repeat steps 7 through 9 for each value you wish to change.
11. Press the
Exit key to return to the COPY OPTIONS menu
screen.
The IMAGING option allows you to perform the following functions:
AUTO ROTATE - Enable or disable automatic image rotation. If
AUTO ROTATE is enabled, the scanned image will be
electronically rotated 90 degrees only to match one of the page
dimensions, prevent clipping on the selected roll, or to correct
the orientation for use with the folder.
REDUCTION LINE PRESERVATION - Use this feature to
enable/disable line preservation when reducing normal and line-
mode documents.
MAXIMUM COPY LENGTH – To see what your Scan System’s
maximum copy length is, select the
Menu key > Configuration
> Copy Options > Imaging > Maximum Copy Length. The
default is 100 feet. For the 6030/6050, the scanned copy would
get cut off at 3 meters.
WARNING: Copy documents that are larger than the printer’s
maximum capability will not print correctly, or may not print at all.
To enable/disable the imaging options:
1. Press the
Menu key. The MAIN MENU screen is displayed.
2. Press the
Enter key to select CONFIGURATION. The
CONFIGURATION menu screen is displayed.
IMAGING