Xerox 6204 Copier User Manual


 
2 Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEM
The XEROX WIDE FORMAT COPY SYSTEM contains Dynamic
Background Suppression technology. Dynamic Background
Suppression examines a sample of the document intelligently and makes
automatic image quality adjustments that yield a good copy even from
poor original documents. The document width is automatically detected
and the centering of a scanned original for most opaque documents is
adjusted. Translucent documents (transparencies, clear film, etc.) in
most cases will not be detected.
The Productivity feature was introduced with version 10.0 firmware and
requires that a new WIDE FORMAT SCAN SYSTEM has a new
Document Feed-in Tray. Sensors built into the Feed Tray measure the
document width without doing a prescan, which increases the document
and copy throughput, thereby increasing productivity.
NOTE: Documents must be centered when using the sensors for width
detection.
For documents that require additional adjustments to obtain the best
copy quality, a variety of image quality and reduction/enlargement
settings are available. All of these functions are controlled from the Scan
System Control Panel. This Control Panel, which is mounted on top of
the Scan System, receives all power and information from the Scan
System.
Feature Keys
Print and Copy feature keys are standard for all printers using FreeFlow
Accxes 12.0 firmware, except for the XEROX WIDE FORMAT 6030/6050
Printer. In the 12.0 firmware, the following feature keys need to be
loaded before the features can be used. See the Feature Key
instructions and Coupon Exchange screens on the
www.xerox.com
website.
XEROX WIDE FORMAT Scan System Features:
Scan-to-Net Feature Key – to create an electronic file from a
scanned image.
Scan-to-Print Feature Key – to scan, create a preview, and
send the scanned image to the printer when the Scan-to-Net
feature is present.
Color Enablement Feature Key – allows color scanning when
the Scan-to-Net feature is present.
Speed Enhancement Turbo II Feature Key – 4 inches per
second (ips) for 36” wide media.
Speed Enhancement Turbo III Feature Key – HFT, PUN, YKE,
YKE-N Controllers only: 7.33 ips in Copy Mode.
XEROX WIDE FORMAT 6030/6050 Printer:
Print Server Enablement Feature Key – Enables print and
copy mode for a remote printer.