Xerox 6204 Copier User Manual


 
XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM 1
Getting to know the WIDE
FORMAT COPY SYSTEM
This manual contains operating instructions for the user and the system
administrator for the XEROX WIDE FORMAT COPY SYSTEM
8825/8830/8850/510 Series, 721P, 6030/6050, and 6204 with version
12.0 FreeFlow Accxes firmware loaded into the Controller.
NOTE: For the 6030/6050 printers that want to use the FreeFlow Accxes
firmware features, the printer also needs to be connected to a separate
PUN or YKE controller, referred to as the FreeFlow Accxes Print Server.
The Web Print Management Tool software will be loaded on the print
server.
Your XEROX WIDE FORMAT COPY SYSTEM is an integrated solution
for electronically scanning and then printing good quality copies of the
images for engineering or architectural size documents. The WIDE
FORMAT COPY SYSTEM consists of the WIDE FORMAT SCAN
SYSTEM and Control Panel for capturing images, the FreeFlow Accxes
Controller for processing these images, and XEROX WIDE FORMAT
COPY SYSTEM Printers 8825, 8830, 8850, 510 Series, 721P,
6030/6050, or 6204.
The WIDE FORMAT COPY SYSTEM has two modes of operation -
COPY and SCAN.
In the COPY mode
, documents are scanned, temporarily stored
in memory or on the FreeFlow Accxes Controller hard disk, and
then sent to the local Printer as soon as the Printer is available.
In the SCAN mode
:
Scan-to-Net: Documents are scanned and then stored on the
FreeFlow Accxes Controller hard disk for later retrieval over a
network by a remote device.
Scan-to-FTP: Scanned images can be transferred to 4 remote
FTP destinations. The scanned images are not
stored on the
FreeFlow Accxes Controller’s hard drive. The FTP feature is
located on the Sample Mode screen.
The WIDE FORMAT COPY SYSTEM allows concurrent printing,
copying, and scanning to the network, so there is no need to wait for the
Printer to finish before scanning the next document.