Filter
Top Products
XEROX WIDE FORMAT COPY SYSTEM Main Menu • 129
• MOTOR SPEED - Enables the Customer Service Engineer to
adjust the Scan System motor speed and correct magnification
errors in the process direction. The diagnostic password is
required for this function.
• LEAD EDGE/TRAIL EDGE - Enables you to execute the lead
edge/trail edge diagnostic.
• SENSORS - Enables you to display the current state of the Scan
System optical paper sensors and the thick document sensor.
• MOTOR COMMUNICATIONS - Enables a document motor
communications loopback test to assist in diagnosing a Scan
System problem.
• DOCUMENT MOTOR - Enables you to stop and start the
document handler motor.
• LAMP - Enables you to turn the lamp on and off and receive a
feedback from the illumination sensor.
• CALIBRATION MOTOR - Enables you to test the calibration
zone motor.
To access the COMPONENT TESTS menu:
1. Press the
Menu key. The MAIN MENU screen is displayed.
2. Press the
Next key until DIAGNOSTICS is highlighted.
3. Press the
Enter key to select DIAGNOSTICS. The
DIAGNOSTICS menu screen is displayed.
4. Press the
Next key until SCANNER DIAGNOSTICS is
highlighted.
5. Press the
Enter key to highlight SCANNER DIAGNOSTICS.
The SCANNER DIAGNOSTICS menu screen is displayed.
6. Press the
Next key until COMPONENT TESTS is highlighted.
7. Press the
Enter key to select COMPONENT TESTS. The
COMPONENT TESTS menu screen is displayed. The black
arrows indicate that the menu contains more options than are
visible. The selected option is highlighted.
COMPONENT TESTS
MOTOR SPEED
LEAD EDGE/TRAIL EDGE
SENSORS
Component Tests Screen
8. Press the
Previous or Next key to scroll through the list of
options.
9. When the desired option is highlighted, press the
Enter key to
select the option. The screen for the selected option is
displayed.