Xerox 8830 Copier User Manual


 
60 Special features keys XEROX WIDE FORMAT COPY SYSTEM
Stop
Start
1
Transform
Sample
Printer
Interrupt
Store/
Recall
Batch
Sets Build
Finisher
A B C
4 5
6
7
8
9
3
0
C/CA
/.
2
D E F
G H I
J K L
M N O
P R S
T U V
W X Y
Numeric Keys Area
Printer Interrupt key
Jobs on the WIDE FORMAT COPY SYSTEM have the following priority:
1. Any job currently printing
2. A copy job that is ready to print
3. A remote print job.
If a remote print job is in progress, a copy job (one or more images
captured by the Scan System), cannot normally use the Printer until the
remote print job has finished. The Printer Interrupt key enables you to
switch the copy priority from normal to high.
To process a copy job immediately, press the Printer Interrupt key. The
Printer Interrupt indicator lamp illuminates. The current pages of the
most current remote print job are completed. Usually a maximum of two
pages are printed. The print job is then suspended and you can run copy
jobs. When the copy jobs are finished, you can press the Printer
Interrupt key again. The Printer Interrupt indicator lamp is
extinguished. The interrupted remote print job resumes.
If you send no more copy jobs, press no keys, and scan no documents,
the Printer Interrupt feature is automatically disabled after a time set by
the PRINTER INTERRUPT timer. Refer to "Timers" in the "Main Menu,
CONFIGURATION" section for instructions about how to set this value.
The default value is 1 minute. It can be set to a value between 1 and 99
minutes.