Filter
Top Products
Installing WinFax for Fax Sharing (Administrators Only)
21
Installing the Fax Sharing Client Manually
If you do not have a modem or communications device attached to your
WinFax station, but another WinFax station on your Fax Sharing network
has an attached modem or device and is configured as a Fax Sharing Host,
you can use that modem or device as if it were attached to your WinFax
station. To do so, you must install WinFax on your computer as a Fax
Sharing Client and connect to the appropriate Fax Sharing Host.
The Setup program guides you through the installation process by prompting
you for information and automatically determining your system configuration,
modem or device setup, COM port location, and available disk space.
Note: To install WinFax under Windows NT/2000, your Windows NT/2000
account must have administrative privileges.
To install WinFax on a client computer:
1 Obtain the following information from your system administrator:
the name of the Fax Sharing Host station on your network
if your Fax Sharing Host station is running under Windows NT/
2000, verify that you have an account set up on the Fax Sharing
Host station (you cannot install or use Fax Sharing Client unless
you have an account)
the password for the Fax Sharing Host station, if one exists
2 Click the Windows Start button, and then click Run. The Run
dialog appears.
3 In the Open field, type ...
<drive and path>\SETUP.EXE
-10 Data type is invalid.
-11 Unknown error during setup.
-12 Dialogs are out of order.
-51 Cannot create the specified folder.
-52 Cannot access the specified folder.
-53 Invalid option selected.
Result Code Meaning