Filter
Top Products
Introduction
Xerox FS 5250, User’s Guide
- 7 -
NOTE:
PCL = factory default. "A" position
Note
Operation mode is outside the B, A, T position. If
you wish to operate in PCL mode, do not change
the default position of the switch!
XES
1
) = "B" position.
Note
To change the driver from default PCL to FSL,
you must follow the instructions in the section
“Changing the Printer Driver”
If you wish to change to the FSL driver, the printer driver must be selected
before you start the operation of the Xerox FS 5250 box. See the section on
“Changing the Printer Driver”.
For details as to the selecting of other output data types in XES mode, you
are referred to the chapter "Output Data".
1
The XES mode selection handles XDPM and XPPM data streams.