Filter
Top Products
User Guide
31
Transparencies
c. Select Phaser 7700 Transparency by pressing the Down or
Up Arrow key.
d. To save your selection, press the OK key.
e. Select the paper size by pressing the Up or Down Arrow key.
f. To save your selection, press the OK key.
Loading transparencies in Tray 1
1. Pull out the tray.
2. Adjust the width and length guides to match the size of the
transparencies.
3. Insert a stack of transparencies into the tray.
■
Place the transparencies long-edge feed (LEF).
■
Place transparencies with the white mark entering the printer
first and the notch in the back-right corner of the tray.
4. Do not load transparencies above the fill line because it may cause
a jam.
5. Reinsert the Universal tray.
6. Enter the paper type on the front panel.
a. Select Phaser 7700 Transparency by pressing the Down or
Up Arrow key.
b. To save your selection, press the OK key.
0806-84