Filter
Top Products
32
Phaser 7700 Color Printer
Transparencies
Using non-Phaser 7700 transparency film
The printer features a unique oil-less fuser. Phaser 7700 Premium
Transparency film is designed specifically to work with the printer's
fuser. If you wish to use non-Phaser 7700 transparency film you must
use film that meets the following specifications:
■
Compatible with oil-less fuser systems
■
Fusing temperature: 165C
■
Thickness: 4.7 mil (120 micrometer)
■
Stiffness: 250 mgf Gurley Units minimum
Transparency film that does not meet these specifications can produce
poor image quality, jam in the printer, wrap around the fuser rollers
and even melt on the fuser rollers. Some non-Phaser 7700
transparencies have paper tape on the leading edge that can separate in
the heat of the fuser, leading to damage. Using non-Phaser 7700
transparencies may damage the fuser. Damage caused by using
non-supported media may not be covered under the warranty, service
agreement, or Total Satisfaction Guarantee.
If there is a jam in the fuser when using a non-Phaser 7700
transparency, the print job is cancelled and cleaning pages are
automatically sent through the printer.
Note
Xerox and Xerox Phaser transparency films developed for
other Xerox printers and copiers are not meant to be used
with the Phaser 7700 printer. Using them may damage the
fuser and may not be covered by the warranty.