Filter
Top Products
Preparing the CRW3200SX Drive
13
SCSI cable
• The connector of SCSI cables or SCSI interface cards varies. A SCSI cable with proper
connectors for both the CRW3200SX drive and the SCSI interface card is required.
SCSI connector of the CRW3200SX drive is D-sub half-pitch 50-pin pin-type.
D-sub half-pitch 50-pin pin-type (for the CRW3200SX drive)
Half-pitch 50-pin Centronics
• The maximum total length of the SCSI cables depends on the number of external
SCSI devices connected to the computer.
For proper operation, connecting the devices with isometric SCSI cables is
recommended. (An example of connection: connecting 3 external SCSI devices)
• An Ultra SCSI mode compatible high impedance cable (characteristic impedance: 100
± 10
Ω
) is required.
The number of external SCSI devices
connected to the computer
The maximum total length
of the SCSI cables
1 to 3 SCSI devices 3.0 m
4 to 7 SCSI devices 1.5 m
Note
CORRECT
INCORRECT
External SCSI devices
Computer
1 m 1 m 1 m
The maximum total length of SCSI cables is 3.0 m.