Filter
Top Products
45
BEAM MODE
BASIC
OPERATION
Outputs sound beams in a single channel. This mode is
ideal if you do not want the sound beams to be reflected
on the walls in your listening room or if you do not disturb
others asleep while enjoying music or movies at night.
In addition, you can adjust the horizontal angle of the
sound beams so that you can hear dialogues clearly even
from a distant location such as the kitchen area in your
listening room.
Press TARGET on the remote control to select
the target mode and then press / to adjust
the angle.
Control range: L90° to R90°
• Press repeatedly to increase the horizontal angle on
the left side.
• Press repeatedly to increase the horizontal angle on
the right side.
• The sound beams are not rebounded off the walls in your
listening room.
• If the target mode is selected as the beam mode, the surround
modes (see page 46), the CINEMA DSP programs (see
page 51) and the TruBass (see page 58) become ineffective. In
addition, no audio is output from the subwoofer connected to
this unit.
Target mode
Notes
5
TARGET
ENTER
VOL