Filter
Top Products
69
MANUAL SETUP
ADVANCED
OPERATION
Use the remote control to access and adjust each
parameter.
y
You can adjust the SET MENU parameters while the unit is
reproducing sound.
1 Press YSP on the remote control to switch to
the operation mode of this unit.
2 Press MENU on the remote control.
The SET MENU screen appears on your TV.
y
• The control buttons used for SET MENU are displayed on
the bottom of the screen.
• To return to the previous screen while using SET MENU,
press RETURN on the remote control.
• To resume cursor button operations after changing the
control area by pressing an input selector button, press
TEST on the remote control.
• To cancel the SET MENU screen, press MENU once
more.
• You can also perform the following operations in the front
panel display.
• If you press an input selector button during the SET
MENU operations, the cursor buttons become ineffective.
In this case, press TEST once.
3 Press / to select MANUAL SETUP and
then press ENTER.
The following screen appears on your TV.
4 Press / to select a sub menu and then
press ENTER.
5 Press / / / and ENTER to configure
each parameter.
6 Press MENU to exit.
The OSD disappears from your TV screen.
Using MANUAL SETUP
2
1
STEREO
SLEEP
CH LEVEL MENU
RETURN
TEST
ENTER
SURROUND
OFF
SPORTS
3
4
56
789
0
+10
5BEAM
ST+3BEAM
3BEAM
TARGET
MUSIC MOVIE VOL MODE
INPUTMODE
YSP
CINEMA DSP
YSP
MENU
.;MEMORY
;AUTO SETUP
;BASIC SETUP
;MANUAL SETUP
[]/[]:Up/Down
[ENTER]:Enter
p
p
SET MENU
ENTER
ENTER
.1 SOUND MENU
2 BEAM MENU
3 INPUT MENU
4 DISPLAY MENU
[]/[]:Up/Down
[ENTER]:Enter
;
MANUAL SETUP
p
p
ENTER
ENTER
ENTER
MENU