Filter
Top Products
84
ADJUSTING SYSTEM PARAMETERS
2 Press / to select the speaker you want
to adjust.
The front panel display changes as follows.
TEST SUBWOOFER is only available when a subwoofer is
connected to this unit and SWFR is selected for BASS OUT in
SOUND MENU (see page 75).
3 Press / to adjust speaker volumes.
Control range: –10 dB to +10 dB
4 Press VOLUME +/– on the remote control to
adjust the volume level of this unit.
5 Press TEST when you have completed all
your adjustments.
y
To adjust the output level of your subwoofer, set BASS OUT to
BOTH or SWFR (page 75).
■ Using the audio output being played
back
You can also manually adjust the speaker levels while
playing back an input source such as a DVD.
• All the speaker levels cannot be adjusted when the stereo mode
is selected as the beam mode (see page 44).
• FRONT L/R cannot be adjusted when the stereo plus 3 mode is
selected as the beam mode (see page 43).
• Only CENTER can be adjusted when the target mode is
selected as the beam mode (see page 45).
1 Press CH LEVEL repeatedly (or press CH
LEVEL and then / ) to select the
speaker you want to adjust.
The front panel display changes as follows.
Note
ENTER
TEST LEFT
TEST CENTER
TEST RIGHT
TEST SUR.R
TEST SUR.L
TEST SUBWOOFE
R
ENTER
VOLUME
TEST
Notes
CH LEVEL MENU
RETURN
TEST
ENTER
SURROUND
OFF
SPORTS
0
+10
CINEMA DSP
CH LEVEL
ENTER
CH LEVEL
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB
or