Z Microsystems 19 Laptop User Manual


 
Doc# 27-0023UM Rev 1.0 Issued 09/04
16
OPERATIONS
To access the onscreen
display main menu, press
the menu button on the
front of the panel. All
2UCCs functions are
controlled using the Main
Menu’s subtopics.
These submenus can be
accessed using the Up
and Down buttons on the
display panel. See sections
below for specifi cs regard-
ing the submenus.
Main Screen Picture Adjust
Use the Up and Down buttons to highlight the “Picture Adjust” option. Press the “Menu”
button to access the submenu.
NOTE: Brightness of the main screen can also be
adjusted without entering the Main Menu
using the up and down display buttons.
Use the Left and Right
buttons to increase and de-
crease the Brightness and
Contrast characteristics of
the screen. Press “Exit” to
return to the Main Menu.
The new adjustments will
be applied automatically.
ONSCREEN MENUS
NOTE: When the unit is initially connected, no pip
screens are enabled, and therefore can not
appear. See section titled “pip confi guration”
for how to enable pip screens.