59
Operations
Load Media in Cutter Mode
6/30/06 105SL User Guide 11342L-001 Rev. A
7.
8.
Align the media with the inner media guide (1). Slide in the outer media guide (2) until it
just touches the edge of the media.
Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers.
Thread the media forward until it passes under the printhead assembly (1), under the
snap plate (
2), and through the cutter assembly (3). (An optional cutter catch tray (4) is
shown in this illustration.)
1
2
3
4
1
2