Filter
Top Products
Here is the command description for the Set Communications command
(refer to your ZPL II Programming Guide for additional programming
information):
^SCa,b,c,d,e,f
where
a = baud rate (110 - 19200 baud)
b = word length (7 or 8 data bits)
c = parity (N = none, E = even, O = odd)
d = stop bits (1 or 2 )
e = handshake (X = XON/XOFF, D = DTR/DSR)
f = Zebra protocol (Y = yes, N = no)
If you do not specify a new setting for a parameter, it remains
unchanged (it does not change to the default value).
If you are using BAR-ONE or other software, adjust the relative darkness
setting as indicated in that software. Or, if you are using ZPL II, send the
^MD (Media Darkness) ZPL II command.
You may choose to network your Zebra A300 printer. Contact your distribu-
tor for information about ZebraNet™ micro print server—ethernet connec-
tivity for your Zebra A300 printer.
55530lr4 Page 17 Wednesday, March 26, 1997 11:18 AM