Filter
Top Products
PRINTER
INSTALLATION
The following will guide you through the instal
-
lation of your P310 Printer.
CAUTION: Limit AC power supplied to the
P310 to 110 ~ 230 volts, 60 ~ 50 Hertz, for an
associated 680 ~ 280 milliamps. Limit excess
current draw to 16 amps or less, using an associ
-
ated circuit breaker or other such device. Never
operate the printer in a location where operator,
computer, or printer can get wet. Personal in
-
jury could result. The electrical security of the
printer is based on the reliability of the mains
power source.
CAUTION: Intermittent or unpredictable oper
-
ation may occur from unsecured connectors. If
damaged, the power cable must be replaced by
an exact equivalent.
4
980261-001 Rev.C
1. Place the printer in a location that allows easy access
to all sides. The printer should never be operated while
resting on its side or upside down.
2. Place the printer’s power switch in the OFF (0)
position.
3. Insert the power cable into the printer power
socket and attach to grounded electrical socket of the
proper voltage and type.
4. Attach interface cable to printer and computer and
then secure.
5. Switch
p
ower on.