Filter
Top Products
Please note that the ribbon automatically
synchronizes whenever the print head lock
down occurs.
980261-001 Rev.C 7
3. Load ribbon onto the supply
spindle (under print head carriage)
and empty core (with tape
attached) onto the take-up spindle.
Make sure the ribbon comes off of
the top of the supply spindle and
feeds to the top of the take-up
4. Push down on the Print Head
Lock Lever until an audible ‘click’
signals the locked-down position.
5. Close Cover.
SUPPLY SPINDLE
TAKE-UP SPINDLE
‘CLICK’