Zebra Technologies Printers Printer User Manual


 
FOREWORD
This manual provides installation and operation information for the Eltron Strata LP (LP2684) and
Strata TLP (TLP2684) printers, manufactured by Zebra Technologies Corporation, Camarillo,
California.
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation. This docu
-
ment and the information contained within is copyrighted by Zebra Technologies Corporation and
may not be duplicated in full or in part by any person without written approval from Zebra. While
every effort has been made to keep the information contained within current and accurate as of the
date of publication, no guarantee is given or implied that the document is error-free or that it is ac-
curate with regard to any specification. Zebra reserves the right to make changes, for the purposeof
product improvement, at any time.
TRADEMARKS
Strata, Strata LP , StrataTLP, LP2684 and TLP2684 are service marks and Eltron isa trademark of
Zebra Technologies Corporation. Windows and MS-DOS are registered trademarks of Microsoft
Corp. All other marks are trademarks or registered trademarks of their respective holders.
FCC NOTICE:
This equipment has been tested and found to comply with the limits of a Class A digital device, pur
-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. How
-
ever, there is no guarantee that interference will not occur in a particular installation. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada ICS-003 class A requirements.
Cet equipement est conforme a l’ICS-003 classe A de la norm Industrielle Canadian
980181-001 Rev.C
iii