Filter
Top Products
Tag Media Sensing The printer uses a moveable sensor to detect in
-
dex holes/notches in tag stock. The sensor can
move from a center tag notch to a notch on the
out side edge of tag stock as wide as 8.5 inches
(216mm) wide.
The dimensions show the position acceptable
position range of the “Notch” (hole) on tag
stock for the printer and the gap sensor’s adjust-
ment range.
Dimension Min. Max. Nominal
A
.236”
(6mm)
—
.512”
(13mm)
B
.079”
(2mm)
.512”
(13mm)
.118”
(3mm)
C
Sensor Adjustment Range (Left Side):
From Center of Media to 4.3”(109mm)
D
.250”
(6.35mm)
——
Maximum Media Width
With Roll Holders - 8.5” (216mm)
Without Roll Holders - 8.75” (222mm)
46 980181-001 Rev.C
Troubleshooting
B
D
C
A
C
L
Left Side
Edge of Tag
Stock Media
Tag
Tear-away
Print
Direction