Zebra Technologies RP4T Printer User Manual


  Open as PDF
of 14
 
10
Introduction
Getting Started
Using the
Printer
Troubleshooting
Contact Us
P4T/RP4T
Quick Start Guide
Cleaning the Printer
Caution•Toavoidpossiblepersonalinjuryordamagetotheprinterneverinsertsharporpointedobjectsintotheprintermechanism.
Area Cleaning Method Interval
Printhead
Elements
Use the supplied cleaning pen to clean the print
elements from end to end (the print elements are
located in the thin gray line on the printhead).
After every five rolls of media (or
more often, if needed)
Platen Surface
Rotate the platen roller and clean it thoroughly with
the cleaning pen.
Peeler Bar
Clean thoroughly with the cleaning pen.
As needed
Tear Edge
Exterior Wipe with water-dampened cloth
Interior Brush/air blow. Ensure the Bar Sensor, Gap Sensor
and Label Present Sensor windows and the Media
Support Disks are free of dust.
Printhead
Elements
Label Presence Sensor
Gap
Sensor
Platen Surface
Peeler Bar
Media
Support
Disks
Tear Edge
Bar Sensor
 previous next