Zebra Technologies Z6000 Printer User Manual


 
Loading Media
To load media, refer to Figure 2.
1. Raise the media cover.
2. Press the Printhead Open Lever(e).
[The Printhead Assembly(f) automatically springs up.]
3. Fold down the Media Supply Guide(g) and slide it out as far from
the printer frame as possible.
4. Slide the Media Guide(h) out as far from the printer frame as pos-
sible.
5. Determine the type of media required for your application and fol-
low the roll media or fanfold media loading procedure.
NOTE: If your printer has either the Power Rewind/Power Peel, Value
Peel, or Cutter option installed, refer to the Options section for media
loading instructions.
Z Series™ User’s Guide 5
f
g
e
h
Figure 2. Loading Media
Media & Ribbon Loading
13
H:...uspiran2.vp
Thu Jul 02 09:48:43 1998
Color profile: Disabled
Composite Default screen