Zebra Technologies Z6000 Printer User Manual


 
AC Power Cord
Since many areas of the world have specific power requirements, an
AC Power Cord may not be included with your printer. Refer to Figure
30. A power cord must be provided by you that meets your local elec-
trical requirements.
WARNING!! For personnel and equipment safety, always use
a three-prong plug with an earth ground connection to the
AC Power Source.
AC Power Cord Specifications
The overall length must be less than 9.8ft. (3.0 meters)
It must be rated for at least 5A, 250V.
The chassis ground (earth) MUST be connected to assure safety and
reduce electromagnetic interference. The ground connection is
handled by the third wire (earth) in the power cord.
The AC power plug and IEC320 connector must bear the
certification mark of at least one of the known international safety
organizations shown in Figure 30.
Z Series™ User’s Guide 75
Appendix C
AC POWER
PLUG FOR
YOUR COUNTRY
3 CONDUCTOR
<HAR> CABLE
IEC 320
CONNECTOR
CONTACT
VIEW
NEUTRAL
LIVE
EARTH
+
R
Figure 30. AC Power Cord Requirements
83
H:...uspiran2.vp
Thu Jun 25 11:20:47 1998
Color profile: Disabled
Composite Default screen