Zebra Technologies ZT230 Label Maker User Manual


 
113
Routine Maintenance
Cleaning Schedule and Procedures
8/22/12 P1048261-004
To clean the printhead and platen roller, complete these steps:
1. Raise the media door.
2.
3.
Remove the ribbon (if used) and the media.
Caution • The printhead may be hot and could cause severe burns. Allow the printhead
to cool.
Caution • Before touching the printhead assembly, discharge any built-up static electricity
by touching the metal printer frame or by using an antistatic wriststrap and mat.
Caution • The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
Rotate the printhead-open lever (1) upward to release the print mechanism (2).
1
2