Filter
Top Products
Routine Maintenance
Cleaning Schedule and Procedures
114
P1048261-004 8/22/12
4. Using the swab from a Zebra Preventive Maintenance Kit, wipe along the brown strip on
the printhead assembly from end to end. In place of the Preventive Maintenance Kit, you
may use a clean swab dipped in a solution of isopropyl alcohol (minimum 90%) and
deionized water (maximum 10%). Allow the solvent to evaporate.
5. While manually rotating the platen roller, clean it thoroughly with the swab. Allow the
solvent to evaporate.
6. Reload the ribbon (if used) and the media. For instructions, see Load the Ribbon
on page 55 or Load the Media on page 60.