Filter
Top Products
153
Specifications
Printing Specifications
8/22/12 P1048261-004
Printing Specifications
Ribbon Specifications
Print resolution 203 dpi (dots per inch) (8 dots/mm)
300 dpi (12 dots/mm)
Dot size (nominal)
(width x length)
203 dpi 0.0043 in. x 0.0052 in.
(0.110 mm x 0.132 mm)
300 dpi 0.0043 in. x 0.0052 in.
(0.110 mm x 0.132 mm)
Maximum print width 203 dpi 4.25 in. (108 mm)
300 dpi 4.16 in. (105.7 mm)
Bar code modulus (X)
dimension
203 dpi 5 mil to 50 mil
300 dpi 3.3 mill to 33 mil
Programmable constant
print speeds
203 dpi and 300 dpi Per second:
• 2 in. (51 mm)
• 3 in. (76 mm)
• 4 in. (102 mm)
• 5 in. (127 mm)
• 6 in. (152 mm)
Model ZT230 ZT220 ZT210
Ribbon
width*
Minimum > 2 in.** (>51 mm**)
Maximum 4.3 in. (110 mm)
Maximum ribbon length 1476 ft (450 m) 984 ft (300 m) 984 ft (300 m)
3:1 media to ribbon
roll ratio
2:1 media to ribbon
roll ratio
2:1 media to ribbon
roll ratio
Ribbon core inside diameter 1 in. (25 mm)
* Zebra recommends using ribbon that is at least as wide as the media to protect the printhead from wear.
** Depending on your application, you may be able to use ribbon narrower than 2 in. (51 mm), as long as the ribbon is wider
than the media being used. To use a narrower ribbon, test the ribbon’s performance with your media to assure that you get
the desired results.