Filter
Top Products
10 Zoom AP+4 User Guide
•
If you are using the AP+4 as a Router/Access Point or
with a cable modem, at
WAN Access Type
select
DHCP Client.
•
If you have an ADSL modem and you are running
PPPoE software on your computer, select
PPPoE
(
P
oint-to-
P
oint
P
rotocol
o
ver
E
thernet) and enter the
User Name
and
Password
given to you by your Internet
Service Provider. If you are unsure whether you are
using PPPoE software, select DHCP Client.
•
If you are using the AP+4 as an Ethernet Client or
Repeater, at
WAN Access Type
select
DHCP
Client
(most users) or
Static IP
.
If you have a Static IP, enter the values for
IP Address
,
Subnet Mask
,
Default Gateway
and
DNS Server
that
you want to use on your network.
•
If you are setting up a Virtual Private Network (VPN)
select PPTP. (Your ISP will tell you if you need to select
this protocol.)
Click
Next
to continue.