Filter
Top Products
58 Zoom AP+4 User Guide
VPN Setup (Client)
On the main
VPN Setup
page, select the option button for a
VPN client and then click
Edit
to open the VPN client setup
page:
Parameter Select or enter . . .
Enable Tunnel x
Select this check box to enable a VPN tunnel
between the AP+4 and another VPN endpoint.
Note:
You can configure multiple tunnels but
you can enable only one at a time.
Connection Name
Enter a client name of your choice.
Auth Type
Select an authentication method:
•
PSK
, then enter a Pre-Shared Key in the
Key Management section at the bottom of
the page.
•
RSA
if you generated an RSA key on the
main VPN Setup page.
Local Site
Select
Subnet Address
or
Single Address
Local IP
Address/Network
Enter 10.0.0.0