Filter
Top Products
Chapter 1. Installing the AP+4 15
If you selected ASCII
and you chose a 64-bit key length,
write your 5-ASCII-character key in the space below for
future reference, and then enter the key in the
Encryption Key 1 box.
— — — — —
Click
Finished
, and at the
Settings changed successfully!
message, click
OK
.
Your basic setup is complete! You don’t need to keep the AP+4
plugged into the setup computer.
•
If you are using the AP+4 as a
Router/Access Point
, your
broadband modem is already connected. You can plug up to
four computers, game stations, or other devices into the
AP+4’s LAN ports. The AP+4 can also link wireless devices
to your network.
•
If you are using the AP+4 as an
Ethernet Client
to provide
access to your wireless network, you can plug up to four
computers, game stations, or other devices into the AP+4’s
LAN ports.
•
If you are using the AP+4 as a
Repeater,
you can unplug the
computer from the AP+4’s LAN port and locate the AP+4
near the edge of the wireless network you want to extend.
If you decide that you want to make changes to any of the
parameters you have configured using the Setup Wizard, turn to
Chapter 3
,
Operating Mode
. Continue with
Chapter 4,
Wireless Configuration
, and
Chapter 5, TCP/IP Settings
.